
Автор: Гуси-Лебеди
Год издания: 0000
Contents
Operating instructions
Maintenance
Car care
Starting the engine using a booster battery
Jacking up the car
Vehicle towing
Maintenance
Maintenance - work plan
Maintenance - works
Engine oil level - checking and filling
Engine oil and oil filter - change
Coolant - check level and fill
Coolant - concentration check
Diesel fuel filter - replace
Replaceable air filter element - replace
Toothed belt - condition inspection and tension check. Cars with a 2.5 liter diesel engine
Exhaust system - visual inspection
Spark plugs - removal, inspection and installation
Transmission. Main gear
Automatic transmission - final drive oil check
Front suspension and steering
Power steering oil level check and filling
Brakes. Tires. Wheels
Brake pad thickness - check
Brake lines - check
Brake fluid - replacement
Wheels and tires
Body. Salon equipment
Dust filter - replace
Electrical equipment
Wiper arm angle - check and adjust
Engine
Specifications
General description
Vehicle and engine identification
Protective cover of the engine - removal and installation
Timing belt - removal, installation and tension. Cars with 1.6 liter engines (102 hp)
Cylinder head - removal and installation. Cars with 1.6 liter 102 hp engines
Toothed belt - removal and installation. Cars with a gasoline engine AVJ / BFB / ALT with a volume of 1.8- / 2.0 liters and a capacity of 150/163/130 hp
Toothed belt - removal and installation. Cars with AWA 2.0-liter petrol engine and 150 hp
Cylinder head - removal and installation. Cars with a petrol engine of 1.8- / 2.0 liters
Toothed belt of the timing mechanism drive - removal, installation and tension. Cars with a V-shaped gasoline engine BDV of 2.4 liters and 170 hp.
Cylinder head - removal and installation. Cars with a V-shaped gasoline engine BDV of 2.4 liters and 170 hp
Toothed belt of the timing mechanism drive - removal and installation. Cars with gasoline engine ASN 3.0 liter and 220 hp
Cylinder head - removal and installation. Cars with gasoline ASN 3.0 liter engine and 220 hp
Timing chain - removal and installation. Cars with a VVK engine of 4.2 liters and 344 hp
Cylinder head - removal and installation. Cars with a VVK 4.2-liter 344 hp engine
Toothed belt of the timing mechanism drive - removal and installation. Vehicles with 1.9 liter TDI AVB / AWX / AVF engine
Cylinder head - removal and installation. Vehicles with 1.9 liter TDI AVB / AWX / AVF engine
Toothed belt of the timing mechanism drive - removal, installation and tension. Cars with V-engine AYM / BCZ / BDG / AKE / BAU / BDH 2.5L TDI
Cylinder head - removal and installation. Vehicles with 2.5 liter V-shaped TDI engine
Engine - removal and installation
Compression - check
Ribbed belt - removal and installation
Engine - Start
Engine lubrication system - general
Engine oil pressure and pressure sensor - check
Oil pan - removal and installation
Oil pump - removal and installation
Cooling, heating and ventilation system
Engine cooling system
Coolant - replacement
Thermostat - removal and installation
Thermostat - check
Radiator - removal and installation
Radiator blower fan - removal and installation
Water pump - removal and installation
Heating and air conditioning
Radiator fan sensor - check
Deflectors - removal and installation
Air distribution flap motor - removal, installation and inspection
Heater / air conditioner switch block - removal and installation
Interior blower motor - removal and installation
Coolant heater - removal and installation
Fuel injection system - gasoline engines
Specifications
General description and precautions
Injection system - check
Power system - diesel engines
How a diesel engine works
Preheat unit - check, remove and install
Glow plugs - removal and installation
Fuel system
General provisions
Fuel pump and fuel gauge sensor - removal and installation
Fuel system - air removal. Cars with 1.8 l petrol engine
Fuel filter - removal and installation. All petrol engines except 1.8L
Fuel pump - performance check
Exhaust system
General information
Turbocharger - removal and installation
Exhaust system - removal and installation
Catalyst and lambda probe - removal and installation
Exhaust System - Fit
Ignition system
General information
Spark plugs
Petrol engine ignition and fuel injection system - general check
Ignition lock and switch - removal and installation
Clutch
General description
Coupling - removal, installation and inspection
Clutch master cylinder - removal and installation
Clutch slave cylinder - removal and installation
Clutch actuator - bleeding
Mechanical transmission
Gearbox - general information
Gearbox - removal and installation
Gearshift mechanism - removal, installation and adjustment
Differential - removal and installation
Automatic transmission
General information
Automatic transmission - removal and installation
Automatic transmission - shift cable adjustment
Braking system
Specifications
General information
Brake pads of disc brakes of front wheels with FN-3 caliper - removal and installation
Brake pads for front disc brakes with caliper FNR-G60 - removal and installation
Brake pads of disc brakes of front wheels with a caliper C54 - removal and installation
Brake pads for rear wheels disc brakes with C38 caliper - removal and installation
Brake pads for rear wheels disc brakes with C43 caliper - removal and installation
Brake disc - check residual thickness
Caliper and brake disc - removal and installation
Parking brake - adjustment
Brake system - bleeding
Brake hoses - removal and installation
Vacuum brake booster - check
Brake light switch - removal and installation
Suspension and steering
Specifications
Front suspension
Suspension strut - removal and installation
Shock strut - disassembly and assembly
Drive shaft - removal and installation
Drive shaft - disassembly and assembly
Rear suspension - general information
Rear suspension coil spring - removal and installation
Rear suspension shock absorber - removal and installation
Steering - general information
Driver's airbag unit - removal and installation
Steering wheel - removal and installation
Tie rod and tie rod end - removing and installing
Tie rod cover - removing and installing
Body and interior trim
General information
Engine mudguard - removal and installation
Bulkhead upper cross member - set to service position
Fairing bulkhead - removal and installation
Front bumper - removal and installation
Front wing - removal and installation
Front wheel arch liner - removal and installation
Rear wheel arch liner - removal and installation
Rear bumper - removal and installation
Hood - removal, installation and fitting
Bonnet lock cable - removing and installing
Front door trim - removal and installation
Rear side door trim - removal and installation
Door - removal and installation
External door handle - removal and installation
Center console - removal and installation
Front pillar trim - removal and installation
Electrical system
General description and precautions
Heated rear window - check
Stop signal - check
Sound signal - removal and installation
Parking aid sensors - removal and installation
Remote Control Batteries - Replacement
Fuses - replacement
Battery - removal and installation
Battery - check
Battery - charging and storage
Generator - general, precautions and inspection
Generator - removal and installation
Alternator and voltage regulator carbon brushes - check and replace
Starter - removal and installation
Traction relay - removal, check and installation
Windscreen wiper
Front glass washer jet - removal, installation and adjustment
Window washer reservoir and pump - removal and installation
Windshield wiper arms - removal and installation
Front glass wiper motor - removing and installing
Rear window wiper motor - removing and installing
Lighting devices - general information
Headlight - removal and installation
Additional brake light - removal and installation
Rear headlamp - removal and installation
Instrument panel - removal and installation
Steering column switches - removal and installation
Troubleshooting
Basic electrical diagrams

Автор: Mike Stabblefield
Год издания:
Руководство Haynes по обслуживанию и ремонту автомобиля Pontiac Fiero (1984-1988 гг.).

Автор: Николаенко Владимир Анатольевич
Год издания:
В данной книге на хорошем инженерном уровне, но в то же время просто и доступно, описаны модели ZAZ-DAEWOO SENS, с 2002 г. выпуска, торговое обозначение: T1311-01, T1311-02. Бензиновый двигатель с системой распределенного впрыска топлива:1. 3 л. - 51.

Автор: Т. А. Казакова
Год издания:
Учебное пособие предназначается изучающим английский язык и входит в систему предметов, обучающих теории и практике перевода. Материал пособия направлен на освоение и развитие практических навыков перевода с английского языка на русский и наоборот.Основным принципом построения пособия, отбора и расположения учебного материала является создание систематического представления о способах, средствах и приемах преобразования языковых единиц в процессе двустороннего перевода. Пособие может бытьиспользовано в рамках учебного процесса на факультетах иностранных языков, для обучения переводчиков, а также для самостоятельных занятий студентов, аспирантов, преподавателей английского языка и начинающих переводчиков.

Автор: Коллектив авторов
Год издания:
Инструкция по ремонту и обслуживанию моделей Fiat Tipo и Tempra. Дано описание всех узлов и агрегатов и советы по их эксплуатации и техобслуживанию. Чертежи, таблицы и схемы электрооборудования.
Fiat Tipo - автомобиль итальянской компании Фиат. Был разработан дизайн студией IDEA. Выпускался с 1988 года по 1996 год.

Автор: Автоклуб
Год издания:
Content
Your BMW 3 series car
- Introduction
- Safety first!
- Troubleshooting an emergency
- Starting the engine from an additional power source
- Wheel replacement
- Towing
- Leak detection
- Weekly checks
- Checks under the hood of the car
- Engine oil level
- Coolant level
- Level of a brake liquid and a working liquid of coupling
- Power steering fluid
- Electrical systems
- Tire condition and air pressure
- Battery
- Working fluids and lubricants
- Overview of the dashboard, warning lights and devices
- Controls
- Cruise control system
- Air conditioning system with manual control and automatic operation
- Storage bays and other interior components
- Introduction
- Regular maintenance
- TO-2
- Resetting maintenance interval (CBS) display mode
- Maintenance of front brakes
- Maintenance of rear brakes
- Car inspection
- Replacement of air filter
- Replacement of spark plugs
- Brake fluid replacement
- Checking and replacing the auxiliary drive belt
- Replacing the fuel filter
- Replacing coolant
- Introduction
- Regular maintenance
- TO-2
- Resetting maintenance interval (CBS) display mode
- Maintenance of front brakes
- Maintenance of rear brakes
- Car Inspection
- Replacement of the air filter (keys 2/5)
- Replacing the main fuel filter
- Replacing the particulate filter
- Brake fluid replacement
- Checking and replacing the auxiliary drive belt
- Changing the coolant
- General information
- Compression check - description and explanation
- Determination of the top dead center for the cylinder 1 piston
- Cylinder head cover - removal and installation
- Torsion damper / pulley and crankshaft pulley hub - removal and installation
- Chains of drive timing - removal, inspection and installation
- Asterisks and timing chain tensioner - removal and installation
- Phase Shifter - description and replacement of components
- Camshafts and pushers
- Cylinder head - removal and installation
- Crankcase - removal and installation
- Front frame reinforcement - removal and installation
- Front subframe - lowering, removal and installation
- Balancing shafts - general information
- Oil pump - removal, inspection and installation
- Oil seals - replacement
- Handwheel / drive clutch plate - Removing and installing
- Centering Crankshaft Bearing - Replacement
- Engine / gearbox mountings - check and replace
- Engine oil level and pressure sensors
- General information
- Compression check - description and explanation
- Determination of the top dead center for the cylinder 1 piston
- Cylinder head cover - removal and installation
- Torsional vibration damper - removal and installation
- Chain of drive timing - removal, inspection and installation
- Components of the valve timing system (Vanos) - removal, inspection and installation
- Camshafts and pushers
- Components of the Valvetronic system - removal and installation
- Cylinder head - removal and installation
- Crankcase - removal and installation
- Oil pump - removal, inspection and installation
- Oil seals - replacement
- Handwheel / drive clutch plate - removing and installing
- Engine / gearbox mountings - flywheel guide bearing - check, remove and install
- Engine oil level and pressure sensors
- General information
- Compression check - description and explanation
- Engine assembly / valve timing - general information and usage
- Cylinder head cover - removal and installation
- Crankshaft pulley / torsional vibration damper - Removing and installing
- Camshafts, rocker arms and hydraulic lifters - removal, inspection and installation
- Cylinder head - removal and installation
- Crankcase - removal and installation
- Oil pump - removal, inspection and installation
- Balancing shaft assembly - removal and installation
- Oil cooler - removal and installation
- Crankshaft oil seals - replacement
- Handwheel / drive clutch plate - Removing and installing
- Engine supports - checking and replacing
- Flywheel guide bearing - check, remove and install
- Chains for timing and cover - removal and installation
- Engine oil level and pressure sensors
- General information
- Compression check - description and explanation
- Engine assembly / valve timing - general information and usage
- Cylinder head cover - removal and installation
- Crankshaft pulley / torsional vibration damper - removing and installing
- Camshafts, rocker arms and hydraulic lifters - removal, inspection and installation
- Cylinder head - removal and installation
- Crankcase - removal and installation
- Oil pump / vacuum pump - removal, inspection and installation
- Balancer shaft assembly - general information
- Oil cooler - removal and installation
- Crankshaft oil seals - replacement
- Handwheel / drive clutch plate - Removing and installing
- Engine supports - checking and replacing
- Flywheel guide bearing - check, remove and install
- Chains of drive timing and cover - general information
- Engine oil level and pressure sensors
- General information
- Major engine repairs - general information
- Engine removal - methods and precautions
- Engine - removal and installation
- Engine overhauling - sequence of disassembly
- Cylinder head - disassembly
- Cylinder head and valves - cleaning and checking
- Cylinder head - assembly
- Piston / connecting rod assembly - removal
- Timing drive chain (diesel engines N47 and N57) - removal and installation
- Crankshaft removal
- Cylinder block / crankcase - cleaning and inspection
- Piston / connecting rod assembly - check
- Crankshaft check
- The crankshaft bearing and thrust bearing - check
- Overhauling - assembly sequence
- Piston rings - installation
- Crankshaft - installation
- Pistons / connecting rods in assembly - installation
- Engine - operation after major repairs
- General information and precautions
- Cooling hoses - detach and replace
- Radiator - removal, inspection and installation
- Thermostat - removal and installation
- Cooling fan and viscous coupling - removal and installation
- Electric cooling fan and casing - Removing and installing
- Electrical sensors for the cooling system - checking, removing and installing
- Water pump - removal and installation
- Heater and ventilation system - general information
- Components of the heater / ventilation system - removal and installation
- Air conditioning system - general information and precautions
- Components of the air conditioning system - removal and installation
- Heating element for auxiliary heater - removal and installation
- Shutters and servomotor for adjusting the intensity of the radiator airflow - removal and installation
- General information and precautions
- Air filter assembly - removing and installing
- Fuel tank - removal and installation
- Accelerator pedal - removal and installation
- Fuel injection system - general information
- Fuel injection system - pressure relief and refueling
- Fuel pump / fuel level sensors - Removing and installing
- Fuel injection system - check and adjustment
- Throttle body - removing and installing
- Components of the distributed fuel injection system - removal and installation
- Collectors - removal and installation
- Power and exhaust system - diesel engines General information and precautions
- Air filter assembly - removing and installing
- Fuel tank - removal and installation
- Accelerator pedal - removal and installation
- Fuel injection system - general information
- Fuel injection system - pressure relief and refueling
- Fuel pump / fuel level sensors and control unit - removal and installation
- Fuel injection system - check and adjustment
- High-pressure fuel pump (fuel pump) - Removing and installing
- Fuel injectors - removal and installation
- Components of the electronic engine management (EDC) - removal and installation
- Turbocharger - description and precautions
- Turbocharger - removal and installation
- Turbocharger - check and overhaul
- Intercooler - removing and installing
- Collectors - removal and installation
- Exhaust system - general information and replacement
- General Information
- Emission control systems (gasoline engines) - checking and replacing components
- Emission control systems (diesel engines) - checking and replacing components
- Catalytic converter - general information and precautions
- General information and precautions
- Detection of malfunctions in the electrical system - general information
- Battery - check and charge
- Storage battery - detachment, removal and installation
- Charge system - check
- Generator drive belt - removal, installation and tension
- Generator - removal and installation
- Generator - check and overhaul
- Startup system - check
- Starter - removal and installation
- Starter - check and overhaul
- Preheating system for diesel engines - description and verification
- Glow plugs - removal, inspection and installation
- Control unit / relay for pre- and post-heating systems - removal and installation
- General information and precautions
- Ignition system - check
- High-voltage ignition coils - removal and installation
- Detonation sensor - removal and installation
- General information
- Clutch assembly - removal, inspection and installation
- Clutch release bearing and lever - removal, inspection and installation
- The working cylinder - removal, check and installation
- Master cylinder - removal, inspection and installation
- Hydraulic clutch circuit - pumping
- Clutch pedal - removal and installation
- General information
- Checking the transmission oil level
- Replacing gearbox oil
- Components of the gearshift mechanism - removal and installation
- Oil seals - replacement
- Switch for reversing lights - check, remove and install
- Manual gearbox - Removing and installing
- Major overhaul of a manual transmission - general information
- General information
- Selector lever - removal and installation
- Cable of the selector lever - removal, installation and adjustment
- Oil seals - replacement
- Automatic gearbox - removal and installation
- Overhaul of an automatic transmission - general information
- Electronic components / sensors - removal and installation
- Checking the automatic transmission fluid level
- Automatic transmission replacement
- General information
- The main gear assembly is removal and installation
- Seals of the final drive assembly - replacement
- Drive shafts - removal and installation
- Anthers of drive shafts - replacement
- Drive shaft - removal and installation
- Rubber coupling propshaft - check and replace
- PTO shaft bearing - checking and replacing
- Universal joints of the propshaft - check and replace
- Checking the final drive oil level
- General information
- Hydraulic system - air removal
- Hydraulic connections and hoses - replacement
- Front brake pads are replacement
- Rear brake pads - replacement
- Front brake disc - check, remove and install
- Rear brake disc - check, remove and install
- Front brake caliper - removal, overhaul and installation
- Rear brake caliper - removal, overhaul and installation
- Master brake cylinder - removal, overhaul and installation
- Brake pedal - removal and installation
- Vacuum brake booster - checking
- The check valve of the vacuum amplifier of brakes - removal, check and installation
- Parking brake - adjustment
- Parking brake lever - removal and installation
- Parking brake cables - removal and installation
- Parking brake shoes - removal and installation
- Stop light switch - removal and installation
- Anti-lock braking system (ABS) - general information
- Anti-lock components - removal and installation
- Vacuum pump - removal and installation
- General Information
- Front hub assembly - removal and installation
- Front tail-vise of swivel pin - removal and installation
- Front pillar - removal, overhaul and installation
- Front levers / rack - removal, overhaul and installation
- Ball joint for front lever - replacement
- Front anti-roll bar - removal and installation
- Connecting rod of the stabilizer of cross-section stability - removal and installation
- Rear hub assembly - replacement
- Rear hub bearing replacement
- Rear shock absorber - removal, overhaul and installation
- Rear helical spring - removal and installation
- Shaft of rear swivel pin - removal, overhaul and installation
- Rear levers / racks - removal, overhaul and installation
- Rear anti-roll bar - removal and installation
- Steering wheel - removal and installation
- Steering column - removal, inspection and installation
- The mechanism for locking the steering column - general information
- Intermediate shaft of the steering column - removal and installation
- Rack-and-pinion steering gear assembly - removal, overhaul and installation
- Power steering pump - removal and installation
- Hydraulic power steering circuit - pumping
- Active Steering control unit - removal and installation
- Rubber anthers of the steering rack - replacement
- Tips of transverse steering rods / ball joints - removal and installation
- The cross-section steering draft - replacement
- Dynamic stability control (dsc) - general information and component replacement)
- Wheel alignment angles - general information
- General information
- Maintenance - body and frame
- Maintenance - upholstery and rugs
- Elimination of minor body damage - repairs
- Removing serious body damage - general information
- Front bumper - removal and installation
- Rear bumper - removal and installation
- Hood - removal, installation and adjustment
- Hood opening cable - removal and installation
- Hood lock - removal and installation
- Doors - removal, installation and adjustment
- Internal door trim panels - removal and installation
- Handle and door lock components - removal and installation
- Glass lifters and regulator - removal and installation
- Lid / tailgate and support pillars - Removing and installing
- Components of the lid / tailgate lock - removal and installation
- Components of the central lock - removal and installation
- Components of electric glass lifts - removal and installation
- Mirrors and related components - removal and installation
- Windshield and rear window - general information
- Hatch - general information, servo replacement and initialization
- Exterior elements of the body - removal and installation
- Seats - removal and installation
- System of pretensioners of seat belts - general information
- Safety belt components - removal and installation
- Internal cladding panels - removal and installation
- Central console - removal and installation
- Fixing panel assembly - removal and installation
- General Information
- Detection of malfunctions in the electrical system - general information
- Fuses and relays - general information
- Switches - removal and installation
- Lamps (external lighting) - replacement
- Lamps (interior lighting) - replacement
- External headlamps - removal and installation
- Adjusting the height of the headlights - general information
- Dashboard - removal and installation
- Components of the instrument panel - removal and installation
- Rain sensor - removal and installation
- Suspension height sensor - removing and installing
- Tire pressure monitoring system indicator - general information
- Acoustic signal - removal and installation
- Wiper arm - removal and installation
- Draft and wiper drive - removal and installation
- Components of the windshield washer system / headlights - removal and installation
- Audio system unit - removal and installation
- Speakers - removal and installation
- Radio antenna - general information
- Cruise control system - general information and component replacement
- Anti-theft system - general information
- Components of the heated front seats - removal and installation
- Airbag System - General Information and Precautions
- Components of the airbag system - removal and installation
- Parking assist system (PDC) - general information and component replacement
- Electrical diagrams - general information
- Dimensions and weight
- Vehicle identification numbers
- General repair procedures
- Lifting the car with a jack, the points of the pillars
- Tools and devices
- Checking the technical condition of the car
- Troubleshooting